DIY Wooden Block Pumpkins to Brighten Your Fall Area


Learn to make straightforward DIY wooden pumpkins to raise your fall decor! This easy venture is ideal for crafters of any ability stage and brings a country contact to your autumn dwelling.

Abilities Required: Newbie. You’re going to be portray wooden blocks, distressing them with wax from a candle, after which reducing felt and Mod Podging. All very fundamental abilities, so should you’re a beginner it is best to nonetheless be tremendous!

Wooden pumpkin blocksWooden pumpkin blocks

Do you ever purchase a craft provide or floor with no intention? Simply since you assume it’s cute, or as a result of “you would possibly want it?”

Responsible as charged.

Occurs on a regular basis, and I’m not even ashamed to confess it anymore. I’m simply every-so-slightly embarrassed about my wood block buy, although. The floor used to make these wood pumpkins. And right here’s why.

I purchased a set of six sq. wood blocks a couple of years in the past for some specific purpose, which on the time I need to’ve been fairly certain of. I imply, I purchased six. There should’ve been an intention.

However quickly after I bought them, I forgot my plans (no matter they have been). In order that they sat in a bin for years – years! – till I noticed them once more throughout a cleansing expedition and determined to show them into fall decor.

DIY wooden pumpkin blocks for fallDIY wooden pumpkin blocks for fall

I don’t know the place the thought got here from to show these into pumpkins, however I do know that after I pulled these from my stash, I used to be in full and whole fall crafts mode.

And you realize when a venture simply comes collectively in your thoughts? That occurred right here. I remembered I had cool felt in inexperienced, wire, and that I may pull some twigs from outdoors . . . it shaped fully inside a matter of seconds.

As soon as the venture has reached the cerebral cortex, it’s go time! I had bought a six-pack of blocks for $20, and had every thing else readily available. SO, these three wood pumpkins price lower than $10 to make for some cute autumn decorations! I’m going to indicate you tips on how to make them beneath.

DIY Wooden Block Pumpkins

Collect These Provides

  • Wooden blocks – 3.5″
  • Craft paint – orange and brown
  • Mod Podge Satin (you can too use Gloss, Matte, or one other Mod Podge formulation)
  • Felt
  • Floral wire
  • Wire cutters
  • Wax candle or chunk
  • Sandpaper
  • Paintbrush
  • Scissors
  • Twigs – I simply pulled some from the Japanese Maple in my yard
  • Robust craft glue or wooden glue – like Clear Gorilla Glue or E-6000
  • Scorching glue gun and glue sticks
  • Drill (with a bit in regards to the dimension of the twigs)
  • Sandpaper (optionally available)

Earlier than you start, it’s possible you’ll wish to sand the blocks if they’re tough. I didn’t as a result of I didn’t thoughts the roughness! It simply provides to the distressed look, and is ideal with classic, rustic, or farmhouse autumn adorning themes.

Paint and Misery the Blocks

You’ll start by portray the blocks with brown paint. You might be welcome to make use of any acrylic paint whether or not it’s common craft paint, chalk paint, or multi floor.

Hand holding an unfinished wood blockHand holding an unfinished wood block

Utterly cowl the blocks with one layer of brown and let dry. What normally works greatest for me is to color a couple of sides on one block after which transfer onto one other. By the point I’m accomplished portray the third, I’m nearly prepared to return to the primary.

Painting a wood block with brown craft paintPainting a wood block with brown craft paint

After you’ve let the blocks dry fully, you’re going to rub wax on them so you’ll be able to misery them. The wax acts as a resist for the orange paint (which will probably be revealed while you sand).

Rub a white candle piece on the perimeters, the highest, after which create the bands down the aspect that provide the “pumpkin really feel.” Brush away any wax chunks.

On the underside and high, make a squiggly sample as seen beneath. The twig goes to stay up within the center.

Wax rubbed onto the painted brown wood blocksWax rubbed onto the painted brown wood blocks

There’s no dry time for wax, so paint the orange over the blocks on all sides in a single layer, the best way you probably did the brown. Let dry fully.

Painting over the brown with orange paintPainting over the brown with orange paint

Be aware: I positioned a finger print on the highest within the moist orange paint so I might be capable of determine it. You’re going to drill a gap on this spot for the stem.

Beginning with one block at a time, sand down the perimeters, the bands, the perimeters, and the highest, revealing the brown paint beneath. You don’t must sand too exhausting. The orange paint will come off comparatively straightforward wherever the wax is. Do that to all your wood pumpkins.

Sanding aware the areas of the pumpkins with waxSanding aware the areas of the pumpkins with wax

Place all of your wooden blocks collectively in your work floor as a result of it’s drilling time!

Sanded wood pumpkin blocksSanded wood pumpkin blocks

Drill and Seal

Select a drill bit that matches the scale of the department you chose. Gently drill into the middle high of every block, holding the block in order that it doesn’t spin. The middle is probably going hole, so that you don’t must go very deep.

Drilling into the top of wood blocks for the stemDrilling into the top of wood blocks for the stem

Wipe away any mud from drilling and coat all three blocks with Mod Podge. Apply to all sides and let dry. The Mod Podge is nice as a result of it offers a pleasant sheen to the venture in addition to evens out the orange paint shade within the areas you sanded.

Painting the wood block with Mod Podge SatinPainting the wood block with Mod Podge Satin

Make the Leaves and Vines

Whereas the blocks are drying, create your pumpkin vines. I merely looked for a pumpkin leaf on-line and printed it out in 5 sizes (as a result of I wished 5 leaves): 2″, 1 7/8″, 1 3/4″, 1 5/8″, and 1 3/8″.

The above measurements are the width of the leaves from high to backside. Truthfully, you’ll be able to even simply draw 5 leaves this dimension. They only have to be the overall form.

Cutting a pumpkin leaf shape out of feltCutting a pumpkin leaf shape out of felt

It is best to reduce two of every dimension. The reason being as a result of you’ll sandwich the wire between them. You want 5 units of two for every wooden block pumpkin. It takes a minute to chop them, however by the point you’re accomplished, the Mod Podge will probably be dry.

Tip: I obtained this cool felt at a craft sale in a warehouse years in the past. Look on Etsy for patterned felt items!

Pumpkin leaves cut out of feltPumpkin leaves cut out of felt

Reduce a size of wire about 12″ lengthy. Then lay out the leaves to plan the look of your vine. Put one layer of felt leaves on the underside, then the wire, then the opposite layer.

You wish to go away just a little little bit of wire additional on the tip with the largest leaf as a result of that can go down into the outlet on the highest of the pumpkin.

Felt leaves placed along the wireFelt leaves placed along the wire

One the leaves are laid out, you’ll be able to scorching glue them onto the wire. Place a number of dots of scorching glue on all elements of the leaf. Glue down the wire and sandwich the second layer on high.

Hot gluing leaves together on both sides of the wireHot gluing leaves together on both sides of the wire

Repeat with all of the leaves and wire. Then trim the wire beneath the final, smallest leaves. Put aside.

Snipping the end of the wire with wire cuttersSnipping the end of the wire with wire cutters

Reduce the Stems

Trim three twigs to make stems. Should you don’t have pruners, use a kitchen knife (and watch out!). My stems are roughly 2 3/4″ – 3″ lengthy. You want just a little little bit of size to go down into the block.

Twigs cut with pruning shearsTwigs cut with pruning shears

Now you’re going to carry every thing collectively! The bottom, the stem, and the vines.

Connect the Stem and Vines

Use a transparent drying, robust craft glue to connect the stems and vines. What I did was bend the wire barely and stick down into the outlet first. Then I added glue, wedged the stem down into the outlet, and added a bit extra glue across the stem.

Gluing the twig and pumpkin leaves into the top of the wood pumpkinGluing the twig and pumpkin leaves into the top of the wood pumpkin

Should you discover the stem isn’t pushing down into the outlet, you’ll be able to shave just a bit bit off with a knife. Shave just a little, strive once more, and repeat.

Wooden pumpkins with the stems dryingWooden pumpkins with the stems drying

Every thing ought to dry, and your DIY wood pumpkin is able to show proudly! I hope you made a number of.

Be aware: In case your stems are slipping into the outlet as a result of the outlet is simply too giant, you’ll be able to lay the block on its aspect and prop up the stem horizontally because it dries. Ensure to make use of sufficient glue across the stem and you ought to be tremendous.

DIY wooden pumpkins

What do you consider my punkins? I hope you’re keen on them as a lot as I do! Oh – I won’t have talked about – the wire lets you bend the vines any approach you want.

Let me know what you assume within the feedback! I’d additionally love so that you can take a look at these different posts as nicely:

Embellish Paper Craft PumpkinsDIY Fall Serviette RingsDIY Fall SignalDIY Leaf BowlDIY Nautical PumpkinDIY Pumpkin MagnetsDIY Pumpkin Seed ArtworkGreenback Tree Fall CraftsFall Leaves BodyGlitter Acorn DecorThe right way to Dry AcornsThe right way to Paint AcornsThe right way to Protect LeavesMod Podge Map PumpkinsPaper Mache PumpkinsWooden Pumpkin Decor

Leave a Reply

Your email address will not be published. Required fields are marked *